PREGUNTA 1 de 19
Indica la falsa
⚪
A)
Si el coste directo es mayor que el coste indirecto estamos en un nivel de mantenimiento excesivo
⚪
B)
Si el coste directo es menor que el coste indirecto estamos en un nivel de mantenimiento deficiente
⚪
C)
En el mantenimiento excesivo se provocaría una infrautilización del sistema de producción.
PREGUNTA 2 de 19
Mantenimiento de almacén, escoge la falsa:
⚪
A)
)Stock de seguridad es el compromiso entre la rotura del stock y el coste de mantener el mismo.
⚪
B)
Realizar inventario en el almacén.
⚪
C)
Apoyarse en una nomenclatura de identificación de piezas
⚪
D)
El MP y el MC son previsibles.
PREGUNTA 3 de 19
Herramienta que se utilizaría si queremos representar múltiples fallos de su secuencia desde el momento inicial hasta el evento objeto de análisis y determinar sus causas:
⚪
A)
Árbol de fallos
⚪
B)
Pareto
⚪
C)
Diagrama espina
⚪
D)
Ninguna de las anteriores
PREGUNTA 4 de 19
¿Qué afirmación es la correcta?
⚪
A)
Hay 58 documentos
⚪
B)
Hay 18 documentos en la fase preparatoria
⚪
C)
No hay documentos
⚪
D)
Existen 30 campos
PREGUNTA 5 de 19
Herramienta que se utilizará para dar varias soluciones y cuantificarlas con ponderaciones:
⚪
A)
Ishikawa
⚪
B)
Matriz de criterios
⚪
C)
Curva ABC
⚪
D)
Pareto
PREGUNTA 6 de 19
Características de plan de mantenimiento de empresa municipal de transporte
⚪
A)
De flujo no lineal, con funcionamiento continuo y con seguridad especial.
⚪
B)
De flujo lineal, con funcionamiento continuo y con seguridad especial.
⚪
C)
De flujo lineal, con funcionamiento discontinuo y con seguridad especial.
⚪
D)
De no flujo lineal, con funcionamiento discontinuo y con seguridad especial.
PREGUNTA 7 de 19
Las Responsabilidades dedicadas a la negligencia grave y daños al medio ambiente:
⚪
A)
Responsabilidades Penales
⚪
B)
Responsabilidades Civiles
⚪
C)
Responsabilidades totales
⚪
D)
Responsabilidades económicas
PREGUNTA 8 de 19
Cita un ejemplo de proceso de flujo intermitente
⚪
A)
Servicio de autobuses
⚪
B)
Fábrica papel
⚪
C)
Escuela
⚪
D)
Factoría de Astilleros
PREGUNTA 9 de 19
¿Qué modelo se aplica a equipos de disponibilidad media?
⚪
A)
Modelo sistemático
⚪
B)
Modelo lineal
⚪
C)
Modelo no lineal
⚪
D)
Modelo intermitente
PREGUNTA 10 de 19
Dentro de las aplicaciones del modelo correctivo, ¿ en qué parte están los códigos de urgencia?
⚪
A)
Parte de averías
⚪
B)
No existen
⚪
C)
En una tabla
⚪
D)
No aparecen
PREGUNTA 11 de 19
¿A qué nos referimos cuando mencionamos al conjunto estructura y documentado de tareas que incluyen las actividades, los procedimientos, los recursos y la duración necesaria para realizar el mantenimiento?
⚪
A)
Plan de prevención
⚪
B)
Plan de mantenimiento.
⚪
C)
A nada
⚪
D)
Plan revisión
PREGUNTA 12 de 19
¿A qué mantenimiento nos referimos cuando hablamos de mantenimiento basado en la condición?
⚪
A)
Preventivo
⚪
B)
Ideal
⚪
C)
Manual
⚪
D)
Predictivo
PREGUNTA 13 de 19
¿A qué nos referimos cuando mencionamos a la aptitud de un elemento de realizar una función requerida bajo unas condiciones determinadas, durante un intervalo de tiempo determinado?
⚪
A)
Fiabilidad
⚪
B)
Resistencia
⚪
C)
Mantenimeinto
⚪
D)
Nada
PREGUNTA 14 de 19
¿A qué nos referimos cuando decimos que el fallo de un elemento es causado directa o indirectamente?
⚪
A)
Fallo terciario
⚪
B)
Fallo secundario
⚪
C)
Fallo primario
⚪
D)
Fallo ninguno
PREGUNTA 15 de 19
¿Quién obligará al Estado miembro destinatario en cuanto al resultado que deba construirse, dejando, sin embargo, a las autoridades nacionales la elección de la forma y de los medios para hacerlo?
⚪
A)
La directiva
⚪
B)
Las autoridades
⚪
C)
Una norma
⚪
D)
La población
PREGUNTA 16 de 19
¿Quién debe realizar las inspecciones reglamentarias si están en manos de una entidad privada en quien la Administración delega la realización de determinados tipos de trabajo y que actúa de modo de “notario”?
⚪
A)
Organismo de Control Autorizado
⚪
B)
RAE
⚪
C)
AENORMAS
⚪
D)
UNE
PREGUNTA 17 de 19
¿Cuáles son las responsabilidades si se detecta una negligencia grave en el incumplimiento de las obligaciones y se producen además daños personales o medioambientales?
⚪
A)
Civiles
⚪
B)
EconómicasP
⚪
C)
Penales
⚪
D)
No tiene
PREGUNTA 18 de 19
Para determinar la tasa de fallo lo podemos hacer en función de:
⚪
A)
Número de horas en funcionamiento
⚪
B)
Distancia total recorrida
⚪
C)
Número de unidades ensayadas
⚪
D)
Todas las anteriores
PREGUNTA 19 de 19
Según la gestión de los recursos humanos tenemos que tener en cuenta:
⚪
A)
Fomentar la polivalencia
⚪
B)
Contratar la especialidad temporalmente
⚪
C)
No tener en cuenta el seguimiento de los trabajos de mantenimiento.
⚪
D)
Ninguna de las anteriores
Este test aún no tiene comentarios 🤔